Stainless steel Bradoon Bit with a 5" copper wire wrapped curved jointed mouth with 38mm rings.

Stainless steel Slow Twist Bradoon Bit with a 5", 9.5mm thick copper twisted mouth with 38mm rings.

Black steel Offset Dee Snaffle Bit with a 5" copper inlaid double jointed broken mouth with copper wire rollers and 76mm (3") rings.

Chain length, 9-1/2" with 3/8" wide links.

Stainless steel Dexter Spoon Bit has a 5" double jointed mouth with spoon. This item has a mouth thickness of 10mm and ring size 45mm. 

Made from high quality leather with stainless steel buckles.

Stainless Steel Dexter Apple Racing Bit has a 5" jointed apple flavored mouth. This item has a ring size of 45mm. 

Ring Snaffle Bit with stainless steel 75mm rings and a 5" bike chain mouth.

Stainless Steel Bit with ring thickness of 75 mm and a 5" jointed twisted wire mouth.

Stainless Steel bit with round eyes and 5" Waterford mouth with 15mm thickness and cheek length of 110mm. Exerts poll pressure with a leverage action caused by upper shanks.

Stainless Steel Hunting Gag Bit with sliding 85 mm half rings and 5" mouth piece with 11 mm thickness.

Stainless steel Bit with 75mm dee rings and a 5" double jointed spoon mouth with mouth thickness of 17mm.

Loose Ring French Snaffle Bit with 70mm, 2 1/2" stainless steel rings and mouth thickness of 16mm.

Stainless steel Serena Song Bit with 65mm rings and a double jointed mouth with thickness of 13mm in size 5" only.

Stainless steel Bit with 75mm dee rings and a 5" Serena Song mouth with thickness of 17mm.

Stainless steel Serena Song Dexter Racing Bit with a 5" double jointed Serena Song mouth. This item has a mouth thickness of 11mm and ring size 47mm. 

Snaffle bit with 65mm (2-1/2") stainless steel rings and french snaffle double jointed 5" mouth with thickness of 19mm.

Stainless steel Braden Direct Bit with leather covered 5" mouth. This item has a mouth thickness of 15mm. 

Stainless steel Crescendo Bit with 5" jointed mouth. This item has ring sizes of 45mm. 

Stainless Steel Jic Bit with 5" mouth. This item has a mouth thickness of 5mm and ring size of 30mm. 

Stainless Steel Mullen Mouth Snaffle Bit has 4-1/4" or 105mm cheeks with a 5" mullen mouth with mouth thickness of 11mm.

Stainless steel Copper Twisted Wire Ring Snaffle Bit has 76mm (3") flat rings and a 5" jointed twisted copper wire mouth with thickness of 8mm.

Stainless Steel Norton Bit with 5" jointed mouth piece. This item has a ring size of 64mm.

Norton Apple Mouth Bit with 5" jointed apple flavored mouth piece. This item has a ring size of 64mm. 

Stainless steel Half Cheek Twisted Wire Bit has 115mm half cheeks and a 5" twisted wire jointed mouth with thickness of 8mm.

Stainless steel Half Cheek Double Twisted Wire Bit with cheek length of 120mm and a 5" double twisted wire offset mouth with mouth thickness of 18mm.

Stainless steel Mini Kimberwick Bit with D rings, curb chain and a 3" jointed mouth with mouth thickness 7mm and ring size 45mm.

Stainless Steel Mini French Snaffle Bit with double jointed 3-3/4" french mouth with mouth thickness of 10mm and ring size 45mm.

Stainless Steel Pony Snaffle Bit with a 4-1/4" double jointed French link mouth with mouth thickness 10mm and ring size 45mm.

Stainless Steel Pony Eggbutt Snaffle Bit with 4" jointed mouth with mouth thickness 9mm and ring size 47mm.

Stainless Steel Mini Eggbutt Snaffle Bit with 3-1/2" jointed mouth with mouth thickness of 10mm and ring size 47mm.

Stainless Steel Mini Pelham Bit with 4" cheeks, curb chain and a 3" jointed mouth with mouth thickness of 10mm, ring size 32mm, and cheek length 102mm.

Stainless Steel Pony Pelham Bit with 4" cheeks, curb chain and a 4-1/2" jointed mouth with thickness of 5mm, cheek length 110mm, and ring size 30mm.

Stainless Steel Mini Loose Ring Snaffle Bit with 40mm rings. Available in size 3-3/4". Mouth thickness of 10mm.

Stainless Steel Pony Loose Ring Snaffle with 45mm rings and a 4-1/4" jointed mouth with mouth thickness 10mm.

Stainless steel Mini Weymouth Bit with 100mm cheeks, curb chain and a 3-1/2" ported mouth with mouth thickness of 10mm. 

Stainless steel Pony Weymouth Bit with 102mm cheeks, curb chain and a 4" ported mouth and ring size 20mm.

Training Snaffle Bit with 5" black steel copper inlaid arched mouth with 7" stainless steel cheeks with mouth thickness of 10mm and cheek length of 176mm. 

Black Steel Correction Bit with copper wire wrapped high port 5" mouth and 6" cheeks. This item has a mouth thickness of 11mm and cheek length of 143mm.

Stainless steel Gag Hackamore with 5" twisted wire sweet iron mouth, stainless steel cheeks, curb chain and rubber covered bike chain noseband. This item has a mouth thickness of 7mm and cheek length...

Stainless steel Correction Bit with 5" copper high port mouth and 9 1/2" cheeks. This item has a cheek length of 178mm. 

Stainless steel Hackamore has 8" cheeks with a 5" twisted wire sweet iron mouth, curb chain, and a leather wrapped noseband. This item has a mouth thickness of 10mm and cheek length of 203mm. 

Stainless steel Gag Bit with 7-1/2" cheek with length of 191mm. Twisted Wire 5" jointed mouth with mouth thickness of 10mm.

Apple Low Port Ring Snaffle Bit, with apple flavored mouth piece and 2-1/2" 65mm stainless steel rings, available in 5" mouth only.

Quality made, 5/8" wide Straight Leather Curb Strap.

Black steel Training Snaffle Bit with 8" cheeks and a 5" jointed copper wire wrapped mouth. This item has a cheek length of 203mm. 

Stainless steel Snaffle Bit with 114mm half cheeks has a apple flavored 5" jointed mouth piece.

Stainless steel Correction Bit with a combination of stainless steel and doubled copper covered rollers on 5" port mouth and 8-1/2" brown steel curved cheeks. This item has a cheek length of 216mm. 

Stainless Steel Concho Snaffle Bit with offset 2-1/2" 65mm Dee Rings with 1-1/2" German Silver Engraved concho and a 5" jointed mouth with thickness of 11mm.

Stainless steel bit with 75mm rings with holes and a 5" Soft Rubber Covered jointed mouth with thickness of 20mm.

Rutledge Bit with 5" mouth and stainless steel shanks can make even the most nervous of horses settle down because there is no pressure on the bars. This item has a mouth thickness of 5mm and cheek...

Stainless steel 5" Sequnda Mouth Full Cheek Bit with mouth thickness of 13mm and cheek length of 165mm.

Stainless steel Gag Bit with 3 rings and 7-1/2" cheek with length of 191mm. Wonder Sweet Iron 5" mouth, that naturally oxidizes or rust, with mouth thickness of 14mm.

Stainless steel bit with 3 stainless steel rings and a 5" jointed hollow mouth with mouth thickness of 21mm, and cheek length 191mm.

Stainless steel Pelham Tom Thumb Bit with cheek length of 130mm and a curved 5" jointed mouth with mouth thickness of 12mm.

Stainless Steel Kimberwick Bit with slotted D rings, curb chain and a 5" jointed Uxeter mouth with mouth thickness of 12mm.

Stainless Steel Bit with slotted D rings, curb chain and a 5" Uxeter Double Hinge mouth with copper roller and mouth thickness of 14mm.

Stainless Steel Standard Bit with D rings, curb chain and a 5" low port mouth with thickness of 12mm.

Stainless Steel Bit with slotted D rings, curb chain and a 5" low port Uxeter mouth with thickness of 14mm.

Stainless Steel Elevator Bit with leather covered 11" cheek length of 279mm. Jointed mouth with mouth thickness of 12mm in size 5".

Stainless Steel Sweet Iron Loose Ring Snaffle Bit with ring size of 66mm (3-1/2") and a 5" jointed sweet iron mouth with thickness of 11mm.

Made with a soft vinyl cover with Velcro® closure. Makes for a more comfortable fit for the horse.

Stainless Steel Copper Mouth Curb Bit is considered a leverage bit because of the action of the curb chain has a 5" copper mouth and 7" cheeks. This item has a cheek length of 178mm. 

Stainless steel Copper Mouth Correction Bit is considered one of the most severe mouth pieces available. Applies tongue pressure at both flexible joints of the port as well as on the bars of the...

Stainless steel Copper Rollermouth Snaffle Bit with jointed 5" copper rollermouth and 6-1/2" cheeks with mouth thickness of 13mm and cheek length of 167mm. 

Stainless steel Training Snaffle Bit with 5" jointed mouth and 6-3/4" cheeks with mouth thickness of 10mm and cheek length 180mm. 

Stainless steel Copper Mouth Training Snaffle Bit is a basic schooling/training bit with 5" jointed copper mouth and 7" cheeks with mouth thickness 10mm and cheek length 170mm. 

Chrome Plated Hackamore with chrome plated 6" cheeks, fleece lined leather nose band for comfort and protection and a durable, heavy curb chain. This item has a cheek length of 173mm. 

Stainless Steel Hackamore bit delivers excellent control with rubber covered bike chain nose band and 9" stainless steel cheeks, curb chain, and slobber bar. This item has a cheek length of 229mm. 

Very effective on horses that do not respond well to a standard bit this Chrome Plated Braided Leather Hackamore has Chrome plated 9" cheeks, slobber bar and a attractive braided leather nose band...

Bit with dee ring thickness of 75mm and a 5" jointed Waterford mouth with thickness of 19mm.

Apple Jointed 2-Ring Elevator Bit with stainless steel rings and apple flavored jointed mouth. Size 5-1/4" only. Mouth thickness 17mm, and cheek length 152mm.

Stainless steel Apple Gag Bit with braided leather nose band, curb chain and a 5" apple flavored jointed mouth. This item has a mouth thickness of 16mm and cheek length of 155m. 

Stainless steel Bit with 75mm dee rings and jointed 5" corkscrew mouth with mouth thickness of 10mm.

Durable 24 link stainless steel Curb Chain. Measures 9" long.

Stainless Steel Curb Chain Hooks.

Stainless steel bit with cheek length of 165mm and a jointed 5" curved mouth with mouth thickness of 15mm.

Stainless steel Eggbutt Snaffle Bit with 53mm round rings and a curved 5" mouth with thickness of 11mm.

Stainless steel Curved Mouth Dee Ring Bit with 65mm rings and 5" mouth with thickness of 13mm.

Brown steel Show Bit has 8" cheeks with brass dots and silver star overlay. Stainless steel with copper inlaid high port pivoting 5" mouth. This item has a mouth thickness of 10mm and cheek length...

Stainless Steel bit with full 180mm cheeks and a jointed 5" hollow mouth with thickness of 21mm.