Stainless steel Eggbutt Snaffle Bit with 70mm flat rings and a 5-1/4" jointed twisted mouth with thickness of 16mm.

Bit with 70mm flat stainless steel rings and a double jointed horizontal elliptical link mouth with thickness of 14mm.

Bit with 55mm loose rings and mouth thickness of 14mm.

Stainless Steel Loose Ring Snaffle Bit with ring size of 55mm and a jointed mouth with mouth thickness of 10mm in size 4" only.

Bit has jointed mouth with thickness of 14mm and ring size of 65mm.

German SilverMouth Thickness: 22mmCheek: 5"Arm: 2-1/2"

Bit with cheek length of 140mm and arm length of 7cm and medium port mouth thickness of 16mm.

Bit has double jointed elliptical link mouth with thickness of 20mm and ring size of 65mm.

Bit with double jointed elliptical link mouth with thickness of 16mm and ring size of 65mm.

Eggbutt Snaffle bit with 60mm stainless steel round rings and a jointed hollow mouth with thickness of 18mm.

Rubber Mouth Piece is an interchangeable 5" mouth piece for bits #20011 and #2100.

Nickle Plated steel Flexible Rubber Straight Bar Bit with 108mm half cheeks and a 5" Rubber over cable mouth with mouth thickness of 21mm.

Soft touch roller ball spurs with 1" shank.

Stainless steel Gag Bit with 3" sliding rings with holes and a 5" double jointed quarter moon mouth piece.

Stainless steel Gag bit with rings with holes and a 5" double jointed mouth with copper roller.

Stainless steel Pelham Bit has a 5" double jointed quarter moon mouth with thickness of 12mm and 5-1/2" cheeks.

Stainless steel Pelham Bit with 4" cheeks and a jointed slow twist mouth with thickness of 15mm.

Stainless steel Copper Roller Pelham Bit with curb chain and a 5" jointed copper roller mouth and 5" cheeks.

Stainless steel Tom Thumb Pelham Bit with curb chain and a 5" copper 13mm mullen mouth and 4" cheeks.

Stainless steel Pelham Bit with 5-1/2" cheeks, curb chain and a 5" high port mouth with thickness of 12mm.

Stainless steel Full Cheek Gag Snaffle Bit has 7" cheeks with rings with holes and a 5" jointed mouth with thickness of 13mm.

Stainless steel English Pelham Roller Mouth Bit with 5" ported copper roller mouth and 6" cheeks with stainless steel curb chain.

Stainless steel Figure Eight Pelham Bit with mouth thickness of 11mm and 4-3/4" cheeks with stainless steel curb chain.

#20011 and #2100 walking bit replacement screws.

Stainless steel Dexter Apple Half Cheek bit with 5" jointed apple flavored mouth and 125mm large rings.

Stainless steel half cheek Slow Twist Copper Bit with a 4-3/4" jointed twisted copper mouth.

Quick and simple! Our Bit Sizer accurately measures for a properly fitted bit. Molded from durable engineered resins and fully washable. A must have for every tack box.

Stainless steel half cheek Snaffle Bit with a 5" copper wire wrapped jointed mouth.

Metal Curb Strap with chain links and quick link ends.

Stainless steel Bit with 50mm rings and a 5" Serena Song double jointed mouth with thickness of 13mm.

Stainless steel Western style Walking Horse Snaffle Bit with 5" mouth and 8" cheeks.

Stainless steel Western style Walking Horse Single Twist Bit has a 5" twisted sweet iron mouth and 10" cheeks.

Stainless steel Dee Ring Bit with looped dee rings and a 5" copper inlaid ported barrel mouth.

Stainless steel Bit with looped dee rings and a 5" jointed copper inlaid ported barrel mouth.

Stainless steel Dee Ring Bit with a 10mm 5" double jointed Segunda mouth and ring size of 75mm.

Stainless steel Player Ring Snaffle Bit with 5" double jointed mouth with attached player.

Nickle plated Berry 4-Way Bit with 14mm 5" jointed mouth and ring size of 32mm.

Stainless steel Ported Curb Bit has a 4-3/4" copper ported mouth and 7" cheeks.

Stainless steel Curb Bit has a 5" jointed copper mouth and 7-1/2" cheeks.

Stainless steel Ring Snaffle bit with a 5" jointed copper inlaid mouth and 3" rings.

Stainless steel Bradoon Bit with a 5" copper wire wrapped curved jointed mouth with 1-1/2" rings.

Stainless steel Slow Twist Bradoon Bit with a 5", 9.5mm thick copper twisted mouth with 1-1/2" rings.

Black steel Offset Dee Snaffle Bit with a 5" copper inlaid double jointed broken mouth with copper wire rollers and 3" rings.

Chain length, 9-1/2" with 3/8" wide links.

Stainless steel Dexter Spoon Bit has a 5" double jointed mouth with spoon.

Made from high quality leather with stainless steel buckles.

Show spurs have a 1" detailed band, 1-7/8" shank and a 14 point rowel and stainless steel buttons.

Stainless Steel Dexter Apple Racing Bit has a 5" jointed apple flavored mouth.

Ring Snaffle Bit with stainless steel rings and a 5" bike chain mouth.

Stainless Steel Bit with ring thickness of 75 mm and a 5" jointed twisted wire mouth.

Stainless Steel bit with round eyes and 5" Waterford mouth and cheek length of 110mm. Exerts poll pressure with a leverage action caused by upper shanks.

Stainless Steel Hunting Gag Bit with sliding 75 mm half rings and 5" mouth piece with 13 mm thickness.

Stainless steel dressage spurs with knob end neck.

Stainless steel Bit with 75mm dee rings and a 5" double jointed spoon mouth with mouth thickness of 17mm.

Loose Ring French Snaffle Bit with 65mm, 2 1/2" stainless steel rings and mouth thickness of 16mm.

Stainless steel Serena Song Bit with 65mm rings and a double jointed mouth with thickness of 13mm in size 5" only.

Stainless steel Bit with 75mm dee rings and a 5" Serena Song mouth with thickness of 17mm.

Stainless steel Serena Song Dexter Racing Bit with a 5" double jointed Serena Song mouth.

Snaffle bit with 2-1/2", 65mm stainless steel rings and french snaffle double jointed mouth with thickness of 19mm.

Spurs with smooth 1" band, 1-7/8" shank, 7/8" 10 point brass rowel and flat brass buttons.

Stainless steel Braden Direct Bit with leather covered 5" mouth.

Stainless steel Crescendo Bit with 5" jointed mouth.

Stainless Steel Jic Bit with 5" mouth.

Stainless Steel Mullen Mouth Snaffle Bit has 4-1/4" or 110mm cheeks with a 5" mullen mouth with mouth thickness of 13mm.

Stainless steel Copper Twisted Wire Ring Snaffle Bit has 3" 75mm flat rings and a 5" jointed twisted copper wire mouth with thickness of 10mm.

Stainless Steel Norton Bit with 5" jointed mouth piece.

Norton Apple Mouth Bit with 5" jointed apple flavored mouth piece.

Stainless steel Half Cheek Twisted Wire Bit has 108mm half cheeks and a 5" twisted wire jointed mouth with thickness of 10mm.

Stainless steel Half Cheek Double Twisted Wire Bit with cheek length of 105mm and a 5" double twisted wire offset mouth with mouth thickness of 12mm.

Stainless steel Mini Kimberwick Bit with D rings, curb chain and a 3" jointed mouth.

Stainless Steel Mini French Snaffle Bit with double jointed 3-3/4" french mouth.

Stainless Steel Pony Snaffle Bit with a 4-1/4" double jointed French link mouth.

Stainless Steel Pony Eggbutt Snaffle Bit with 4" jointed mouth.

Stainless Steel Mini Eggbutt Snaffle Bit with 3-1/2" jointed mouth.

Stainless Steel Mini Pelham Bit with 4" cheeks, curb chain and a 3" jointed mouth.

Stainless Steel Pony Pelham Bit with 4" cheeks, curb chain and a 4-1/2" jointed mouth.

Stainless Steel Mini Loose Ring Snaffle Bit with 45mm rings. Available in size 3-3/4".

Stainless Steel Pony Loose Ring Snaffle with 45mm rings and a 4-1/4" jointed mouth.

Stainless steel Mini Weymouth Bit with 102mm cheeks, curb chain and a 3-1/2" ported mouth.

Stainless steel Pony Weymouth Bit with 102mm cheeks, curb chain and a 4" ported mouth.

Overlay trim, 3/4" oval band, 2-1/8" shank, 1-1/4" 10 point brass rowel and buttons.

German gold and silver engraved trims, 1" band, 2" shank, and 1-1/4" 8 point rowel and engraved buttons.

Engraved trim, 1" band, 1-1/4" shank and 1-1/4" 18 point blued steel rowel and brass buttons.

Engraved floral trim, 1" band, 2-1/2" shank, and 1-1/4" 16 point rowel and brass buttons.

German silver engraved Texas Ranger Star trim, 1" band, 2" shank and 1" 9 point brown steel rowel with silver engraved swing buttons.

Engraved 1-1/4" band, 1-1/2" shank, and 1-1/4" 10 point brass rowel and brass buttons.

Engraved brass trim, 3/4" band, 2" shank and 2" 16 point rowel with jingle bobs and brass buttons.

German silver trim, 3/4" band, 1-3/4" shank, 3/4" 6 point rowel and brass buttons.

Spurs with copper and silver trim, 1-1/2" band, 2" gal leg shank, 1-1/2" 10 point brass rowel and engraved buttons.

Black steel spurs with engraved German silver playing card trim, 1" band, 1-3/4" shank and 1-1/4" brass 10 point rowel and brass buttons.

Engraved German silver trim, 3/4" band, 1-1/2" shank, brass buttons and knob end.

Engraved German silver trim, 1-1/2" band, 14 degree offset 3" shank, 1" 10 point brass rowel and brass swing buttons.

Engraved German silver trim, 1" band and 2" shank with brass rowel and buttons.

Spurs with engraved gold and copper trim, 1" band, 2" shank and 1" 10 point rowel with brass buttons.

Spurs with 3/4" band, 2" shank and 1-1/4" 10 point brass rowel and buttons.

Spurs with 3/4" braided band, 1-3/4" shank, brass buttons and 1" 10 point brass rowel.

Spurs with 3/4" embossed braided basket weave pattern band, 1-3/4" shank, 3/4" 24 point brass rowel and brass buttons.

Spurs with embossed braided pattern and a 3/4" band, 1 3/4" shank, brass buttons and 3/4" 6 point brass rowel.

Spurs with 5/8" gun blued horseshoe band with brass horseshoe nail heads, 1-1/8" shank, 1-1/8" 8 point brass rowel and fixed brass buttons.

Spurs with embossed braided pattern 1/2" band, 1-1/2" shank and 7/8" 10 point brass rowel with brass buttons.