THE BEST Tongue Control Lugging Bit is the revolutionary bit for racing & harness horses. Designed to replace tongue ties and solve the toughest breathing and control challenges, THE BEST Tongue Control Bit is a game-changing, patented solution for...

The Bit Wrap you have loved for generations, Sealtex® is offered in a 1-1/2" width for bit wrapping. Sealtex® is completely unaffected by water, without a weave or mesh to become clogged with mud, that absorbs no water whatsoever. Measures 1-1/2"...

100% LATEX bandage/wrap that can be used for a variety of purposes including:-Wrapping bits and bit repair.-Covering on curb chains and hackamore nosebands.-Grip wrap on tools, etc. -Waterproof workout bandage for horses.-Waterproof bandage for pets (and...

The best wet-track bandage on the market! Self-sealing Sealtex® Latex Bandage is the only bandage completely unaffected by water. Without a weave or mesh to become clogged with mud, this bandage will not absorb water whatsoever when used on a wet track...

Feather-Weight® Thoroughbred Leather Overcheck is made with stainless steel hardware and latigo leather. Pretreat with your favorite leather care product for added longevity.MADE IN USA

Feather-Weight® Thoroughbred Overcheck is made of Beta® material with leather padding over nose area. One size only.Made in USA

The best wet-track bandage on the market!  Self-sealing Sealtex® Latex Bandage is the only bandage completely unaffected by water. Without a weave or mesh to become clogged with mud, this bandage will not absorb water whatsoever when used on a wet...

Introducing Equiglow Latex Bandage – Your Ultimate Multi-Use Self-Seal Waterproof latex bandage. The No.1 choice on the market! Easy Customization for Your horse Equiglow bandage not only is easy to apply, but it also allows you to customize as required...

Equine Healthcare International Bit Wrapping Tape is a latex-free, soft, self-adhesive silicone tape that can be used to reduce pinching, cushion your horse's bit, and repair your horse's favorite bit!Directions for use:Make sure your bit is thoroughly...

ProSeries Derby Pelham Bit is custom made of stainless steel with a Peter Pletcher teardrop style solid brass mouthpiece with high quality craftsmanship.

ProSeries Derby Full Cheek Bit is custom made of stainless steel with a Peter Pletcher teardrop style solid brass mouthpiece with high quality craftsmanship.

Same design as our # 3627 Puller Spring Bit with leather wrap over the rubber covered 5" mouth. Made of stainless steel. Designed with hinged spring rings for horses that pull.

Solid Brass Chifney Bit.

Rubber covered nylon with stainless steel. Designed to help control pullers. Used in conjunction with driving bit. The length is measured from inside of ring to inside of ring. MADE IN USA

Chin strap attaches to front overcheck, and attaches to throat latch. Made of nylon/beta webbing with soft padding.MADE IN USA

Made from beta webbing with leather padding over nose. Available in regular and long. MADE IN USA

Malleable iron/Nickle plated with a 5" jointed mouth and 9" cheeks.

Bit with stainless steel rings and a double jointed apple flavored mouth with peanut with mouth thickness 15mm, and cheek length 152mm. 

Bit Snap is designed for Chifney Bits and measures 1-5/8" long.

Nylon straps and stainless steel buckles and 2 rows of stainless steel flat link chain.

Nylon straps and stainless steel buckles with double chains.

Nylon straps with stainless steel double link 4-1/2" flat chain.

Snaffle Bit with stainless steel eggbutt 70mm flat rings and Apple Flexible Shaped apple flavored mouth.

Stainless steel Kimberwick bit with stainless steel 55mm D rings and adjustable curb chain and an apple favored flexible shaped mouth.

Stainless steel bit with round eyes, cheek length of 105mm, with double jointed mouth and mouth thickness of 13mm. Exerts poll pressure with a leverage action caused by upper shanks.

Stainless steel buckles and double link chain with leather straps.

Stainless Steel Springsteen Bit with curved half cheek, 4 rings with mouth thickness of 17mm.

5" Stainless steel Crit Davis Bit with solid spoon.

Jaw Bit (even) is stainless steel.

Stainless steel bit with 1" (25mm) rings and a Overcheck Mullen mouth with thickness of 6mm.

Stainless Steel Bit with 1" rings and 4-3/4" jointed mouth. Typically used together with a half cheek snaffle driving bit.

Stainless steel Half Cheek Snaffle Bit has jointed mouth with thickness of 15mm and 140mm cheeks.

Winning Tongue Plate Dexter Bit with Brakes & Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. This bit design creates...

Winning Tongue Plate Dexter Bit with Brakes & Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit...

Loose Ring Bit with Brakes & Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips.This bit design creates power steering...

Winning Tongue Plate Loose Ring Bit with Brakes & Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11mm low profile gear casing prevents roof rubbing, and the flat plate prevents...

Stainless steel bit with 165mm full cheeks and rings and a jointed apple flavored mouth.

The Original Bit+Wash™ Bit Cleaning Kit is a new and innovative cleaner that does not only have the same great flavor and taste as The Original Bit Butter®, but it also cleans and disinfects your horse's bit, increases acceptance of the bit, improves...

Winning Tongue Plate 3 Ring Elevator Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Used to have a soft and...

Winning Tongue Plate 3 Ring Elevator Bit with Normal Plate has joint and arms do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching...

Winning Tongue Plate Polo Gag Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 12 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching and...

Winning Tongue Plate Polo Gag Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Mainly used in the polo...

Winning Tongue Plate Full Cheek Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching...

Winning Tongue Plate Full Cheek Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Mainly used by colt breakers...

Winning Tongue Plate Western Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching and...

Winning Tongue Plate Western Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Used to have a soft and...

Winning Tongue Plate Polo Gag Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 12 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching and...

Winning Tongue Plate Polo Gag Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Mainly used in the polo...

Winning Tongue Plate 4 Ring Elevator Bit with Normal Plate has joint and arms do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching...

Winning Tongue Plate 4 Ring Elevator Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips. Used to have a soft and...

Winning Tongue Plate Eggbutt Bit with Normal Plate has joint and arms do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching and...

Winning Tongue Plate Eggbutt Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips.Used in all riding disciplines...

Winning Tongue Plate Dexter Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching and...

Winning Tongue Plate Dexter Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips.Widely used in thoroughbred and...

Winning Tongue Plate Half Cheek Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11 mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching...

Winning Tongue Plate Half Cheek Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips.Used among harness horse...

Winning Tongue Plate Loose Ring Bit with Normal Plate has joint and arms that do not hinge downward thereby preventing pain to the roof, tongue, and bars. The 11mm low profile gear casing prevents roof rubbing, and the flat plate prevents bit pinching...

Winning Tongue Plate Loose Ring Bit with Extended Plate corrects breathing problems, and stops displacement of the soft palate. The bit arms have limited travel to prevent outer ring pressure, and pain to the cheek and lips.Used in all riding disciplines...

Dee Ring Bit has 64mm stainless steel dee rings, a soft rubber covered jointed mouth with mouth thickness of 20mm.

Stainless Steel Dee Ring Snaffle Bit with stainless steel 55mm rings, and a jointed mouth with mouth thickness of 9mm.

Stainless Steel Dee Ring Bit with hollow jointed mouth with mouth thickness of 20mm and ring size of 75mm.

Stainless steel Dexter Ring Racing Bit features a jointed mouth and 2" rings.

Stainless steel Dexter Racing Bit has a rubber covered jointed mouth piece.

Stainless steel Dexter Half Cheek Ring Bit features a jointed mouth.

Stainless steel Dexter Half Cheek Racing Bit has a jointed rubber covered mouth piece.

Easy care Rubber Bit Guards.

Stainless steel eggbutt snaffle bit with 55mm rings and a apple flavored mullen mouth with thickness of 12mm.

Eggbutt Snaffle Bit with stainless steel 73mm rings and a rubber covered jointed mouth with mouth thickness of 21mm.

Stainless steel bit has rings and cheek length of 175mm and a rubber covered jointed mouth with thickness of 21mm.

Stainless Steel Dexter Ring Racing Bit features a jointed copper mouth with mouth thickness of 13mm and 2" rings.

Apple Ring Bit with flexible shaped apple flavored mouth and 65mm stainless steel rings.

Stainless Steel Chifney Bit.

Elevator Bit with 3 stainless steel rings and apple flavored flexible mouth piece.

Elevator Bit with stainless steel rings with moutht thickness 20mm, and cheek length 152mm, and a apple flavored flexible shaped mouth piece.

Loose 65mm Stainless Steel Rings with Apple flavored jointed mouth with thickness of 16mm.

Apple Pelham Bit with stainless steel rings, mouth lthickness 15mm, cheek length 127mm stainless steel curb chain and apple flavored jointed mouth. 4-1/2" mouth has 5" cheeks and 1-3/4" arm5-1/2" mouth has 5" cheek and 2-1/4" arm

Stainless steel Rubber Mouth Pelham Bit has jointed rubber mouth with mouth thickness of 21mm, cheek length 140mm, and stainless steel curb chain.Available in sizes:4-1/2" mouth features 5" cheeks, 2-1/4" arm and 2" rings5" mouth features 5-1/2" cheeks,...

These interchangeable swivel bit side cheeks with ring can be used with various mouth pieces. (Mouth piece sold separately.) This item has a cheek length of 178mm. 

Bit with ring size of 55mm and double jointed horizontal elliptical link mouth with thickness of 14mm.

Stainless steel Pelham Bit with curb chain, cheek length of 125mm and jointed mouth with mouth thickness of 12mm.

Stainless steel Dee Ring Bit with 64mm dee rings and a Super Hinge jointed mouth with copper and stainless steel rollers with mouth thickness of 12mm.

Stainless steel Kimberwick Bit with slotted D rings, curb chain and Elliptical Link Uxeter mouth with thickness of 12mm.

Elevator bit with 3 rings and a double jointed French Link mouth with thickness of 14mm, and cheek length 191mm. 

Stainless steel bit with cheek length of 165mm and a jointed twisted wire mouth with mouth thickness of 10mm.

Stainless steel bit with 70mm flat rings and cooper inlay mouth piece with roller and mouth thickness of 14mm.

Eggbutt Snaffle Bit with 70mm flat stainless steel rings and copper overlay jointed mouth piece with thickness of 14mm.

Stainless steel bit with 70mm round rings and Dr Bristol jointed mouth with thickness of 12mm.

Stainless steel Eggbutt Snaffle Bit with 67mm flat rings and a double jointed French mouth piece with mouth thickness of 14mm.

Bit with 55mm rings and double jointed elliptical link mouth with thickness of 16mm.

Bit has 65mm rings with horizontal elliptical link mouth thickness of 12mm.

Bit with 55mm rings and jointed mouth with thickness of 11mm.

Bit with 50mm Eggbutt ring size and hollow mouth thickness of 17mm.

Eggbutt Bradoon Bit with 67mm stainless steel rings and mouth thickness of 13mm.

Stainless steel Elevator Bit with 3 rings and a jointed mouth with mouth thickness of 18mm, and cheek length of 191mm. 

Stainless Steel Gag Bit with 75mm rings with holes and a double jointed French Link mouth with thickness of 12mm.

Stainless Steel Loose Ring Snaffle Bit with ring size of 65mm and a jointed mouth with thickness of 20mm.

Loose Ring Snaffle Bit has 65mm stainless steel rings with a jointed mouth with thickness of 18mm.

Loose Ring Snaffle Bit with 50mm stainless steel rings and a jointed mouth with mouth thickness of 12mm.

German SilverMouth Thickness: 16mmCheek Length: 133mm  Cheek: 5-1/4"Arm:  2-3/4"

Bit has rotating 5-1/2" (130mm) stainless steel cheeks and mouth thickness of 17mm with arm length of 3-1/2".